What you can do with the kit
You'll have everything you need to position up to 8 anchor rods, mark drilling locations and build reusable 2x4 formwork templates. You can use a small AnkrRise template and a large 5-rail AnkrRise template. We also include a bag of 40 corner formwork brackets, so you can build ten 2x4 formwork templates with 4 anchors each.
You'll also have the assembly rods and screws to build your 2x4 templates. Use the marking adapters to mark directly in the formwork and the AnkrPrism to check your axes. In short, you won't be missing anything with this kit.
Small AnkrRise template4 to 14 in
Large AnkrRise template4 to 27 in
What's in the box
- 5Large precision rail (4 to 27 in)
- 4Small precision rail (4 to 14 in)
- 10Corner installation bracket
- 2Center installation bracket
- 6Corner marking bracket
- 2Center marking bracket
- 40Corner 2x4 formwork bracket
- 12Center 2x4 formwork bracket
- 4Center bracket spacer
- 96Anchor rod adapter, in the diameter you choose (6 tubes of 16)
- 8Assembly rod, in the diameter you choose
- 8Formwork marking adapter
- 6Assembly screw, 3 in
- 10M6 black handle screw
- 20M6 wing screw
- 1AnkrPrism hands-free prism
- 1Sharpie fine-point marker
- 7Storage tube, 3 x 12 in
- 14Storage tube cap
- 2Storage bag
- 2Shipping box
The ultimate formwork tool
Set anchor bolts right. The first time.
- Saves time and money on every pour
- Increases layout accuracy
- Lets you pour from the center
- Shields bolts from concrete splatter
- 2" thick support keeps your bolts plumb
Profitable on your very first job.
- Reusable, job after job
- Works with or without formwork
- Measure and validate any template in seconds
- Compatible with our hands-free prism (AnkrPrism)
- Graduated rules on every axis
See it in action
Three ways to set your anchor bolts
- Installation supportsScrew the AnkrRise onto the formwork and pour. Every rod stays right where it belongs.
- 2x4 formwork supportsBuild a solid 2x4 template on site, then strip the supports and reuse them.
- Marking supportsMark exactly where to drill a plywood sheet, then use it as your template.
Add-ons and spare parts
Complete your setup
-
Anchor bolt adapter (16)
Add another anchor rod diameter to your kit.
$24.99 CAD
-
Corner formwork bracket set (40)
Build more 2x4 templates at the same time.
$399.99 CAD
-
Center formwork bracket set (12)
Add center anchors to your 2x4 templates.
$74.99 CAD
-
AnkrRise small (4-14in)
Add a second small template to your setup.
$249.99 CAD
-
AnkrRise large (4-27in)
Precision template for 4 to 27 in anchor spacing.
$379.99 CAD
-
Installation bracket set
Corner and center brackets to install anchor rods.
$99.99 CAD
-
Marking bracket set
Mark drilling locations with a Sharpie.
$69.99 CAD
-
Marking adapter (8)
Mark drilling locations with your 2x4 templates.
$24.99 CAD
-
AnkrPrism (hands-free)
Check your layout with a total station, hands-free.
$149.99 CAD
-
AnkrRise transport bag
Carry your equipment to the job site.
$79.99 CAD
-
Sharpie fine-tip marker (12)
Fine-point markers for the marking brackets and adapters.
$29.99 CAD
-
M6 Black handle screws (10)
Mount the brackets on the precision rails.
$29.99 CAD
-
Wing screws (20)
Secure the U-shaped bars to the rails.
$19.99 CAD
-
Assembly rods
To build 2x4 templates in your rod diameter.
$29.99 CAD
-
Assembly screws 3in (6)
Hold your 2x4s in place while you build.
$29.99 CAD
-
Center bracket spacers (4)
Used with the center brackets on the precision rails.
$29.99 CAD


















